■詳細説明 ◎ Easy to Use ◎ 3.5”LCD Display Panel ◎ Eco Saving ◎ 8 Stage Charging Mode ◎ Charging Mode Selection > 12V:Normal/Snow/Boost > 24V:Normal/Snow ◎ Charging Current Selection: > 12V:For Lead-acid battery:1A/3A/7A/10A. > For LiFePO4 battery:Maximum current is 10A. > 24V:For Lead-acid battery:1A/2A/4A/6A. ◎ Testing Program >Battery > Alternator (Only for 12V) > Engine Start (Only for 12V) ◎ Complete Safety Protection ◎ Low Voltage Solutions ◎ DC Supply Function Supply Power For Your Car Electronic Devices.Accessories: > OBDII/ Cigarette Connector/Cigarette Female Socket ◎ User-Friendly Interface ◎ Portable Hanging Hook ◎ Adopt a Pulse Charging Scheme ◎ Saving Your Last Charging Process Automatically ◎ Battery Type Selection:WET/MF/AGM/GEL/LiFePO4 ◎ Modern & Simple Design
8 Stage Charging Mode
(1) Soft start:Tests if the battery can accept charge,charging willcommence if battery is okay. (2) Pulse:Pulsing current removes sulphates from the battery platesand restores battery efficiency and capacity. (3) Bulk Charge:Charges with maximum set current untilapproximately 80% of capacity. (4) Absorption:Charging with constant voltage and declining currentto equalizing and maximize up the battery capacity. (5) Test:Tests if the battery can hold charge. If the batteriesvoltage drops below 11.6V within 10 minutes,battery is faulty. (6) Float:Keep the battery voltage at maximum level by providing aconstant voltage charge. (7) Maintenance:Battery maintenance mode active when the batteryvoltage is lower than 12.6V the charger will automatically startmaintenance charging. (8) Cycle Recharge:A continuation of the maintenance mode whichmonitors battery voltage and do cycle charging automatically forevery 15 days.
◎ Easy to Use
◎ 3.5”LCD Display Panel
◎ Eco Saving
◎ 8 Stage Charging Mode
◎ Charging Mode Selection
> 12V:Normal/Snow/Boost
> 24V:Normal/Snow
◎ Charging Current Selection:
> 12V:For Lead-acid battery:1A/3A/7A/10A.
> For LiFePO4 battery:Maximum current is 10A.
> 24V:For Lead-acid battery:1A/2A/4A/6A.
◎ Testing Program
>Battery
> Alternator (Only for 12V)
> Engine Start (Only for 12V)
◎ Complete Safety Protection
◎ Low Voltage Solutions
◎ DC Supply Function Supply Power For Your Car Electronic Devices.Accessories:
> OBDII/ Cigarette Connector/Cigarette Female Socket
◎ User-Friendly Interface
◎ Portable Hanging Hook
◎ Adopt a Pulse Charging Scheme
◎ Saving Your Last Charging Process Automatically
◎ Battery Type Selection:WET/MF/AGM/GEL/LiFePO4
◎ Modern & Simple Design
8 Stage Charging Mode
(1) Soft start:Tests if the battery can accept charge,charging willcommence if battery is okay.
(2) Pulse:Pulsing current removes sulphates from the battery platesand restores battery efficiency and capacity.
(3) Bulk Charge:Charges with maximum set current untilapproximately 80% of capacity.
(4) Absorption:Charging with constant voltage and declining currentto equalizing and maximize up the battery capacity.
(5) Test:Tests if the battery can hold charge. If the batteriesvoltage drops below 11.6V within 10 minutes,battery is faulty.
(6) Float:Keep the battery voltage at maximum level by providing aconstant voltage charge.
(7) Maintenance:Battery maintenance mode active when the batteryvoltage is lower than 12.6V the charger will automatically startmaintenance charging.
(8) Cycle Recharge:A continuation of the maintenance mode whichmonitors battery voltage and do cycle charging automatically forevery 15 days.
■注意点
※取扱説明書が付属する場合は外国語となります。
※輸入商材の為、納期が遅れる場合がございます。あらかじめご了承ください。
※画像には他のカラー・タイプ・商品が含まれている場合があります。
※メーカー都合により商品の仕様変更がある場合がございます。ご了承ください。